PARV.KHARE
Home › Engineering Notes › Part 13
Drone & counter-drone engineering · Part 13

The Counter-Drone Ladder: From Shotguns to Lasers

The economics of each counter-drone layer — close-in shotguns, autocannon, interceptor drones and directed energy — and why cost per engagement decides who wins against swarms.

By Parv Khare · First shared on LinkedIn, September 2026

Close-in: shotguns

Ukrainian units have trained soldiers to engage FPV drones with shotguns. Under about 50 m a spread of shot creates a real probability of hit against a fast, small target; beyond that the pellets lose energy and spread too thin. Against swarms it's impractical, but for forward infantry against close-in nuisance drones it's a real tactic that costs almost nothing per shot.

Autocannon short-range air defence

The next tier is rapid-fire autocannon — systems such as the Oerlikon 35 mm or the German Gepard — firing proximity-fused rounds at 600–1,000 rounds per minute. A proximity fuze detonates near the target, so a direct hit isn't needed. Effective against drones out to 3–4 km, at roughly $10–50 per round and a handful of rounds per kill. Economically viable against most threats.

Interceptor drones

Tube-launched, jet-powered interceptors such as the Coyote Block 3 home on a target drone at longer ranges and higher altitudes than guns can reach, at around $30–50k per unit. The limitation: it's still an expensive munition, and against a 300-drone swarm you run out before the swarm does.

Directed energy — the cost curve inverts

This is where the economics finally flip in the defender's favour. Laser weapons like the UK's DragonFire (50 kW) or the US HELIOS (60 kW) can engage a drone for around $10 of electricity per shot, with 3–10 seconds of engagement per target at ranges up to about 5 km.

Part of an ongoing engineering series on drones and counter-drone systems, lightly edited from the original LinkedIn post.

← Part 12: Drone Jamming Explained: GPS, RF Links and Frequency HoppingPart 14: Infrared Sensors and the Coming "IR-Cold" Electric Drone →
Written by Parv Khare, Mechanical Engineering student at VIT Vellore, member of Team Rotor FPV and passionate about defence technologies. Follow the series on LinkedIn.