How a Drone's IMU Works — and Why It Drifts
A clear explainer on MEMS accelerometers and gyroscopes, why integration drift makes IMUs useless alone for long-range navigation, and what replaces GPS when it is jammed.
What an IMU actually contains
An IMU combines three orthogonal MEMS accelerometers and three orthogonal MEMS gyroscopes (rate sensors) in a single package. The accelerometers measure specific force (true acceleration minus gravity) along each axis. The gyroscopes measure angular rate around each axis. Integrate angular rate once to get attitude. Integrate specific force twice (with gravity subtracted) to get position. Simple in principle.
The drift problem
MEMS gyroscopes have a bias — a non-zero output when not rotating — typically 1–10 degrees per hour for consumer grade, 0.01–0.1 deg/hr for tactical grade. Over a 30-minute flight at the cheaper end, that's 0.5–5° of attitude error. For a 1,000 km flight, that translates to position error of 8–87 km. This is why GPS (or terrain-following) is essential for long-range guidance.
MEMS vs. fibre-optic vs. ring-laser
There's a hierarchy of gyroscope technologies: MEMS (cheap, drifty), fibre-optic gyro (FOG, intermediate cost, excellent for tactical drones), and ring-laser gyro (RLG, expensive, navigation grade, sub-0.001 deg/hr). For reusable ISR drones where GPS may be jammed, a FOG-based INS becomes worth the cost.
GPS-denied environments — the next frontier
Ukraine has shown that GPS can be jammed effectively over a battlefield. This pushes drone designers toward alternatives: terrain-referenced navigation (matching optical/radar imagery to a stored map), visual odometry (tracking feature movement from a camera), and magnetometry (using Earth's magnetic field variations as a position reference). All of these are active research areas where mechanical engineering graduates are needed.
Part of an ongoing engineering series on drones and counter-drone systems, lightly edited from the original LinkedIn post.