PARV.KHARE
Home › Engineering Notes › Part 16
Drone & counter-drone engineering · Part 16

Inside a Patriot Battery: Phased-Array Radar and the Magazine Problem

How a Patriot battery is organised, how electronically steered phased-array radar enables track-while-scan, PAC-2 vs PAC-3 interceptors, and why finite magazines struggle against cheap swarms.

By Parv Khare · First shared on LinkedIn, October 2026

System architecture

A Patriot battery consists of the AN/MPQ-65 phased-array radar (search and track), an engagement control station, a communications relay, launching stations holding 4 or 8 missiles each in canisters, and diesel generators for power. The whole battery can be emplaced in under an hour.

Phased-array basics

The MPQ-65 is a C-band (4–8 GHz) phased array — a flat panel of thousands of antenna elements, each with a phase shifter behind it. By controlling each element's phase, the beam is steered electronically in milliseconds without moving the antenna. That lets the radar search wide sectors and track specific targets at the same time — a capability called track-while-scan.

PAC-2 vs. PAC-3

The PAC-2 GEM-T uses a proximity-fused fragmentation warhead, effective against aircraft and cruise missiles. The PAC-3 MSE uses hit-to-kill: a small, highly manoeuvrable missile that physically strikes the threat, at roughly $4M per round.

The magazine problem

Each launcher holds 4 PAC-3 or 8 PAC-2 missiles, and resupply takes hours. A battery with three launchers carrying PAC-3 is depleted after a dozen engagements. That is the fundamental limitation cheap drone swarms exploit — not the capability of individual engagements, but the exhaustion of finite magazines against large numbers of low-cost opponents.

Part of an ongoing engineering series on drones and counter-drone systems, lightly edited from the original LinkedIn post.

← Part 15: Hearing Drones: Acoustic Detection, TDOA and Machine LearningPart 17: How Iron Dome Works — and Where It Struggles With Drones →
Written by Parv Khare, Mechanical Engineering student at VIT Vellore, member of Team Rotor FPV and passionate about defence technologies. Follow the series on LinkedIn.